View HCT595ADT_7659446.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? semiconductor components industries, llc, 2000 may, 2000 rev. 0 1 publication order number: mc74vhct595a/d

! the mc74vhct595a is an advanced high speed 8bit shift register with an output storage register fabricated with silicon gate cmos technology. it achieves high speed operation similar to equivalent bipolar schottky ttl while maintaining cmos low power dissipation. the mc74vhct595a contains an 8bit static shift register which feeds an 8bit storage register. the device input is compatible with ttltype input thresholds and the output has a full 5 v cmos level output swing. the input protection circuitry on this device allows overvoltage tolerance on the input, allowing the device to be used as a logiclevel translator from 3.0 v cmos to 5.0 v cmos logic, or from 1.8 v cmos logic to 3.0 v cmos logic, while operating at the highvoltage power supply. shift operation is accomplished on the positive going transition of the shift clock input (sck). the output register is loaded with the contents of the shift register on the positive going transition of the register clock input (rck). since the rck and sck signals are independent, parallel outputs can be held stable during the shift operation. and, since the parallel outputs are 3state, the vhc595 can be directly connected to an 8bit bus. this register can be used in serialtoparallel conversion, data receivers, etc. the internal circuit is composed of three stages, including a buffer output which provides high noise immunity and stable output. the input structure provides protection when voltages up to 7 v are applied, regardless of the supply voltage. this allows the device to be used to interface 5 v circuits to 3 v circuits. the output structures also provide protection when v cc = 0 v. these input and output structures help prevent device destruction caused by supply voltageeinput/output voltage mismatch, battery backup, hot insertion, etc. ? high speed: f max = 185mhz (typ) at v cc = 5v ? low power dissipation: i cc = 4 m a (max) at t a = 25 c ? ttlcompatible inputs: v il = 0.8 v; v ih = 2.0 v ? power down protection provided on inputs ? balanced propagation delays ? designed for 3 v to 5.5 v operating range ? low noise: v olp = 1.0 v (max) ? pin and function compatible with other standard logic families ? latchup performance exceeds 300ma ? esd performance: hbm > 2000v; machine model > 200v this document contains information on a product under development. motorola reserves the right to change or discontinue this product without notice. http://onsemi.com device package shipping ordering information mc74vhct595ad soic16 48 units/rail mc74vhct595adr2 soic16 2500 units/reel soic16 d suffix case 751b tssop16 dt suffix case 948f soic eiaj16 m suffix case 966 marking diagrams 1 8 9 16 1 8 16 9 1 16 9 8 vhct595a awlyyww a = assembly location wl = wafer lot yy = year ww = work week vhct 595a awlyww vhct595a alyw mc74vHCT595ADT tssop16 96 units/rail mc74vHCT595ADTr2 tssop16 2500 units/reel mc74vhct595am soic eiaj16 50 units/rail mc74vhct595amel soic eiaj16 2000 units/reel a = assembly location l = wafer lot y = year w = work week a = assembly location wl = wafer lot y = year ww = work week mc74vHCT595ADTel tssop16 2000 units/reel
mc74vhct595a http://onsemi.com 2 pin assignment 13 14 15 16 9 10 11 12 5 4 3 2 1 8 7 6 rck oe si qa vcc sqh sclr sck qe qd qc qb gnd qh qg qf logic diagram serial data input 14 11 10 12 13 sck sclr rck oe shift register storage register 15 1 2 3 4 5 6 7 9 qa qb qc qd qe qf qg qh sqh si parallel data outputs serial data output oe rsk si 14 15 qa en3 12 13 c2 1d iec logic symbol srg8 sclr 10 sck 11 c/1 r 2d 3 1 2 3 4 5 6 7 9 qb qc qd qe qf qg qh sqh 2d 3
mc74vhct595a http://onsemi.com 3 d r q sra dq stra d q srb dq strb r d q src dq strc r d q srd dq strd r d q sre dq stre r d q srf dq strf r d q srg dq strg r d q srh dq strh r expanded logic diagram oe rck si sck sclr 13 12 14 11 10 15 1 2 3 4 5 6 7 9 qa qb qc qd qe qf qg qh sqh parallel data outputs
mc74vhct595a http://onsemi.com 4 function table inputs resulting function operation reset (sclr ) serial input (si) shift clock (sck) reg clock (rck) output enable (oe ) shift register contents storage register contents serial output (sqh) parallel outputs (qa qh) clear shift register l x x l, h, l l u l u shift data into shift register h d l, h, l dsr a ; sr n sr n+1 u sr g sr h u registers remains unchanged h x l, h, x l u ** u ** transfer shift register contents to storage register h x l, h, l u sr n str n * sr n storage register remains unachanged x x x l, h, l * u * u enable parallel outputs x x x x l * ** * enabled force outputs into high impedance state x x x x h * ** * z sr = shift register contents d = data (l, h) logic level = hightolow * = depends on reset and shift clock inputs str = storage register contents u = remains unchanged = lowtohigh ** = depends on register clock input ??????????????????????? ??????????????????????? maximum ratings* ???? ???? symbol ?????????????? ?????????????? parameter ????? ????? value ??? ??? unit ???? ???? v cc ?????????????? ?????????????? dc supply voltage ????? ????? 0.5 to + 7.0 ??? ??? v ???? ???? v in ?????????????? ?????????????? dc input voltage ????? ????? 0.5 to + 7.0 ??? ??? v ???? ? ?? ? ???? v out ?????????????? ? ???????????? ? ?????????????? dc output voltage v cc = 0 high or low state ????? ? ??? ? ????? 0.5 to + 7.0 0.5 to v cc + 0.5 ??? ? ? ? ??? v ???? ???? i ik ?????????????? ?????????????? input diode current ????? ????? 20 ??? ??? ma ???? ???? i ok ?????????????? ?????????????? output diode current (v out v cc ) ????? ????? 20 ??? ??? ma ???? ???? i out ?????????????? ?????????????? dc output current, per pin ????? ????? 25 ??? ??? ma ???? ???? i cc ?????????????? ?????????????? dc supply current, v cc and gnd pins ????? ????? 75 ??? ??? ma ???? ? ?? ? ???? p d ?????????????? ? ???????????? ? ?????????????? power dissipation in still air, soic packages2 tssop package2 ????? ? ??? ? ????? 500 450 ??? ? ? ? ??? mw ???? ???? t stg ?????????????? ?????????????? storage temperature ????? ????? 65 to + 150 ??? ??? c * absolute maximum continuous ratings are those values beyond which damage to the device may occur. exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. functional operation under absolutemaximumrated conditions is not implied. 2derating e soic packages: 7 mw/ c from 65 to 125 c tssop package: 6.1 mw/ c from 65 to 125 c recommended operating conditions ???? ???? symbol ??????????????? ??????????????? parameter ??? ??? min ?? ?? max ??? ??? unit ???? ???? v cc ??????????????? ??????????????? dc supply voltage ??? ??? 3.0 ?? ?? 5.5 ??? ??? v ???? ???? v in ??????????????? ??????????????? dc input voltage ??? ??? 0 ?? ?? 5.5 ??? ??? v ???? ? ?? ? ???? v out ??????????????? ? ????????????? ? ??????????????? dc output voltage v cc = 0 high or low state ??? ? ? ? ??? 0 0 ?? ?? ?? 5.5 v cc ??? ? ? ? ??? v ???? ???? t a ??????????????? ??????????????? operating temperature ??? ??? 55 ?? ?? + 125 ??? ??? c ???? ???? t r , t f ??????????????? ??????????????? input rise and fall time v cc =5.0v 0.5v ??? ??? 0 ?? ?? 20 ??? ??? ns/v this device contains protection circuitry to guard against damage due to high static voltages or electric fields. however, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this highimpedance cir- cuit. for proper operation, v in and v out should be constrained to the range gnd (v in or v out ) v cc . unused inputs must always be tied to an appropriate logic voltage level (e.g., either gnd or v cc ). unused outputs must be left open.
mc74vhct595a http://onsemi.com 5 the ja of the package is equal to 1/derating. higher junction temperatures may affect the expected lifetime of the device per the ta ble and figure below. device junction temperature versus time to 0.1% bond failures junction temperature c time, hours time, years 80 1,032,200 117.8 90 419,300 47.9 100 178,700 20.4 110 79,600 9.4 120 37,000 4.2 130 17,800 2.0 140 8,900 1.0 1 1 10 100 1000 time, years normalized failure rate t j = 80 c t j = 90 c t j = 100 c t j = 110 c t j = 130 c t j = 120 c failure rate of plastic = ceramic until intermetallics occur figure 1. failure rate vs. time junction temperature ?????????????????????????????????? ?????????????????????????????????? dc electrical characteristics ???? ???? ?????? ?????? ?????? ?????? ???? ???? v cc ??????? ??????? t a = 25 c ?????? ?????? t a = 85 c ????? ????? t a = 125 c ??? ??? ???? ???? symbol ?????? ?????? parameter ?????? ?????? test conditions ???? ???? v cc (v) ??? ??? min ??? ??? typ ??? ??? max ???? ???? min ??? ??? max ??? ??? min ??? ??? max ??? ??? unit ???? ? ?? ? ???? v ih ?????? ? ???? ? ?????? minimum highlevel input voltage ?????? ? ???? ? ?????? ???? ? ?? ? ???? 3.0 4.5 5.5 ??? ?? ? ??? 1.4 2.0 2.0 ??? ? ? ? ??? ??? ? ? ? ??? ???? ? ?? ? ???? 1.4 2.0 2.0 ??? ? ? ? ??? ??? ? ? ? ??? 1.4 2.0 2.0 ??? ? ? ? ??? ??? ? ? ? ??? v ???? ? ?? ? ???? v il ?????? ? ???? ? ?????? maximum lowlevel input voltage ?????? ? ???? ? ?????? ???? ? ?? ? ???? 3.0 4.5 5.5 ??? ?? ? ??? ??? ? ? ? ??? ??? ? ? ? ??? 0.53 0.8 0.8 ???? ? ?? ? ???? ??? ? ? ? ??? 0.53 0.8 0.8 ??? ? ? ? ??? ??? ? ? ? ??? 0.53 0.8 0.8 ??? ? ? ? ??? v ???? ???? v oh ?????? ?????? minimum highlevel output voltage v in v ih or v il ?????? ?????? v in = v ih or v il i oh = 50 m ???? ???? 3.0 4.5 ??? ??? 2.9 4.4 ??? ??? 3.0 4.5 ??? ??? ???? ???? 2.9 4.4 ??? ??? ??? ??? 2.9 4.4 ??? ??? ??? ??? v ???? ? ?? ? ???? ?????? ? ???? ? ?????? v in = v ih or v il ?????? ? ???? ? ?????? v in = v ih or v il i oh = 4 ma i oh = 8 ma ???? ? ?? ? ???? 3.0 4.5 ??? ?? ? ??? 2.58 3.94 ??? ? ? ? ??? ??? ? ? ? ??? ???? ? ?? ? ???? 2.48 3.80 ??? ? ? ? ??? ??? ? ? ? ??? 2.34 3.66 ??? ? ? ? ??? ??? ? ? ? ??? ???? ? ?? ? ???? v ol ?????? ? ???? ? ?????? maximum lowlevel output voltage v in v ih or v il ?????? ? ???? ? ?????? v in = v ih or v il i ol = 50 m a ???? ? ?? ? ???? 3.0 4.5 ??? ?? ? ??? ??? ? ? ? ??? 0.0 0.0 ??? ? ? ? ??? 0.1 0.1 ???? ? ?? ? ???? ??? ? ? ? ??? 0.1 0.1 ??? ? ? ? ??? ??? ? ? ? ??? 0.1 0.1 ??? ? ? ? ??? v ???? ? ?? ? ???? ?????? ? ???? ? ?????? v in = v ih or v il ?????? ? ???? ? ?????? v in = v ih or v il i ol = 4 ma i ol = 8 ma ???? ? ?? ? ???? 3.0 4.5 ??? ?? ? ??? ??? ? ? ? ??? ??? ? ? ? ??? 0.36 0.36 ???? ? ?? ? ???? ??? ? ? ? ??? 0.44 0.44 ??? ? ? ? ??? ??? ? ? ? ??? 0.52 0.52 ??? ? ? ? ??? ???? ???? i in ?????? ?????? maximum input leakage current ?????? ?????? v in = 5.5 v or gnd ???? ???? 0 to 5.5 ??? ??? ??? ??? ??? ??? 0.1 ???? ???? ??? ??? 1.0 ??? ??? ??? ??? 1.0 ??? ??? m a ???? ? ?? ? ???? i cc ?????? ? ???? ? ?????? maximum quiescent supply current ?????? ? ???? ? ?????? v in = v cc or gnd ???? ? ?? ? ???? 5.5 ??? ?? ? ??? ??? ? ? ? ??? ??? ? ? ? ??? 4.0 ???? ? ?? ? ???? ??? ? ? ? ??? 40.0 ??? ? ? ? ??? ??? ? ? ? ??? 40.0 ??? ? ? ? ??? m a ???? ???? i cct ?????? ?????? quiescent supply current ?????? ?????? input: v in = 3.4 v ???? ???? 5.5 ??? ??? ??? ??? ??? ??? 1.35 ???? ???? ??? ??? 1.50 ??? ??? ??? ??? 1.5 ??? ??? ma ???? ? ?? ? ???? i opd ?????? ? ???? ? ?????? output leakage current ?????? ? ???? ? ?????? v out = 5.5 v ???? ? ?? ? ???? 0.0 ??? ?? ? ??? ??? ? ? ? ??? ??? ? ? ? ??? 0.5 ???? ? ?? ? ???? ??? ? ? ? ??? 5.0 ??? ? ? ? ??? ??? ? ? ? ??? 5.0 ??? ? ? ? ??? ma ???? ? ?? ? ???? i oz ?????? ? ???? ? ?????? threestate output offstate current ?????? ? ???? ? ?????? v in = v ih or v il v out = v cc or gnd ???? ? ?? ? ???? 5.5 ??? ?? ? ??? ??? ? ? ? ??? ??? ? ? ? ??? 0.25 ???? ? ?? ? ???? ??? ? ? ? ??? 2.5 ??? ? ? ? ??? ??? ? ? ? ??? 2.5 ??? ? ? ? ??? m a
mc74vhct595a http://onsemi.com 6 ?????????????????????????????????? ?????????????????????????????????? ac electrical characteristics (input t r = t f = 3.0ns) ???? ???? ?????? ?????? ????????? ????????? ???????? ???????? t a = 25 c ????? ????? t a = 85 c ????? ????? t a = 125 c ??? ??? ???? ???? symbol ?????? ?????? parameter ????????? ????????? test conditions ??? ??? min ??? ??? typ ??? ??? max ??? ??? min ??? ??? max ??? ??? min ??? ??? max ??? ??? unit ???? ???? f max ?????? ?????? maximum clock frequency (50% dt c l) ????????? ????????? v cc = 3.3 0.3 v c l = 15pf r l = 1 k c l = 50pf ??? ??? 80 55 ??? ??? 150 130 ??? ??? ??? ??? 70 50 ??? ??? ??? ??? 70 50 ??? ??? ??? ??? mhz ???? ? ?? ? ???? ?????? ? ???? ? ?????? duty c ycle ) ????????? ? ??????? ? ????????? v cc = 5.0 0.5 v c l = 15pf r l = 1 k c l = 50pf ??? ? ? ? ??? 135 95 ??? ? ?? ??? 185 155 ??? ?? ? ??? ??? ? ? ? ??? 115 85 ??? ? ? ? ??? ??? ? ? ? ??? 115 85 ??? ? ? ? ??? ??? ? ? ? ??? ???? ???? t plh , t phl ?????? ?????? propagation delay, sck to sqh ????????? ????????? v cc = 3.3 0.3 v c l = 15pf c l = 50pf ??? ??? ??? ??? 8.8 11.3 ??? ??? 13.0 16.5 ??? ??? 1.0 1.0 ??? ??? 15.0 18.5 ??? ??? 1.0 1.0 ??? ??? 15.0 18.5 ??? ??? ns ???? ? ?? ? ???? ?????? ? ???? ? ?????? ????????? ? ??????? ? ????????? v cc = 5.0 0.5 v c l = 15pf c l = 50pf ??? ? ? ? ??? ??? ? ?? ??? 6.2 7.7 ??? ?? ? ??? 8.2 10.2 ??? ? ? ? ??? 1.0 1.0 ??? ? ? ? ??? 9.4 11.4 ??? ? ? ? ??? 1.0 1.0 ??? ? ? ? ??? 9.4 11.4 ??? ? ? ? ??? ???? ???? t phl ?????? ?????? propagation delay, cplr to sqh ????????? ????????? v cc = 3.3 0.3 v c l = 15pf c l = 50pf ??? ??? ??? ??? 8.4 10.9 ??? ??? 12.8 16.3 ??? ??? 1.0 1.0 ??? ??? 13.7 17.2 ??? ??? 1.0 1.0 ??? ??? 13.7 17.2 ??? ??? ns ???? ? ?? ? ???? ?????? ? ???? ? ?????? ????????? ? ??????? ? ????????? v cc = 5.0 0.5 v c l = 15pf c l = 50pf ??? ? ? ? ??? ??? ? ?? ??? 5.9 7.4 ??? ?? ? ??? 8.0 10.0 ??? ? ? ? ??? 1.0 1.0 ??? ? ? ? ??? 9.1 11.1 ??? ? ? ? ??? 1.0 1.0 ??? ? ? ? ??? 9.1 11.1 ??? ? ? ? ??? ???? ? ?? ? ???? t plh , t phl ?????? ? ???? ? ?????? propagation delay, rck to qaqh ????????? ? ??????? ? ????????? v cc = 3.3 0.3 v c l = 15pf c l = 50pf ??? ? ? ? ??? ??? ? ?? ??? 7.7 10.2 ??? ?? ? ??? 11.9 15.4 ??? ? ? ? ??? 1.0 1.0 ??? ? ? ? ??? 13.5 17.0 ??? ? ? ? ??? 1.0 1.0 ??? ? ? ? ??? 13.5 17.0 ??? ? ? ? ??? ns ???? ???? ?????? ?????? ????????? ????????? v cc = 5.0 0.5 v c l = 15pf c l = 50pf ??? ??? ??? ??? 5.4 6.9 ??? ??? 7..4 9.4 ??? ??? 1.0 1.0 ??? ??? 8.5 10.5 ??? ??? 1.0 1.0 ??? ??? 8.5 10.5 ??? ??? ???? ? ?? ? ???? t pzl , t pzh ?????? ? ???? ? ?????? output enable time, oe to qaqh ????????? ? ??????? ? ????????? v cc = 3.3 0.3 v c l = 15pf r l = 1 k c l = 50pf ??? ? ? ? ??? ??? ? ?? ??? 7.5 9.0 ??? ?? ? ??? 11.5 15.0 ??? ? ? ? ??? 1.0 1.0 ??? ? ? ? ??? 13.5 17.0 ??? ? ? ? ??? 1.0 1.0 ??? ? ? ? ??? 13.5 17.0 ??? ? ? ? ??? ns ???? ???? ?????? ?????? ????????? ????????? v cc = 5.0 0.5 v c l = 15pf r l = 1 k c l = 50pf ??? ??? ??? ??? 4.8 8.3 ??? ??? 8.6 10.6 ??? ??? 1.0 1.0 ??? ??? 10.0 12.0 ??? ??? 1.0 1.0 ??? ??? 10.0 12.0 ??? ??? ???? ? ?? ? ???? t plz , t phz ?????? ? ???? ? ?????? output disable time, oe to qaqh ????????? ? ??????? ? ????????? v cc = 3.3 0.3 v c l = 50pf r l = 1 k ??? ? ? ? ??? ??? ? ?? ??? 12.1 ??? ?? ? ??? 15.7 ??? ? ? ? ??? 1.0 ??? ? ? ? ??? 16.2 ??? ? ? ? ??? 1.0 ??? ? ? ? ??? 16.2 ??? ? ? ? ??? ns ???? ???? ?????? ?????? ????????? ????????? v cc = 5.0 0.5 v c l = 50pf r l = 1 k ??? ??? ??? ??? 7.6 ??? ??? 10.3 ??? ??? 1.0 ??? ??? 11.0 ??? ??? 1.0 ??? ??? 11.0 ??? ??? ???? ???? c in ?????? ?????? input capacitance ????????? ????????? ??? ??? ??? ??? 4 ??? ??? 10 ??? ??? ??? ??? 10 ??? ??? ??? ??? 10 ??? ??? pf ???? ? ?? ? ? ?? ? ???? c out ?????? ? ???? ? ? ???? ? ?????? threestate output capacitance (output in highimpedance state), qaqh ????????? ? ??????? ? ? ??????? ? ????????? ??? ? ? ? ? ? ? ??? ??? ? ?? ? ?? ??? 6 ??? ?? ? ?? ? ??? ??? ? ? ? ? ? ? ??? ??? ? ? ? ? ? ? ??? 10 ??? ? ? ? ? ? ? ??? ??? ? ? ? ? ? ? ??? 10 ??? ? ? ? ? ? ? ??? pf typical @ 25 c, v cc = 5.0v c pd power dissipation capacitance (note 1.) 87 pf 1. c pd is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption with out load. average operating current can be obtained by the equation: i cc(opr ) = c pd v cc f in + i cc . c pd is used to determine the noload dynamic power consumption; p d = c pd v cc 2 f in + i cc v cc . noise characteristics (input t r = t f = 3.0ns, c l = 50pf, v cc = 5.0v) t a = 25 c symbol characteristic typ max unit v olp quiet output maximum dynamic v ol 0.8 1.0 v v olv quiet output minimum dynamic v ol 0.8 1.0 v v ihd minimum high level dynamic input voltage 2.2 v v ild maximum low level dynamic input voltage 0.7 v
mc74vhct595a http://onsemi.com 7 timing requirements (input t r = t f = 3.0ns) ???? ? ?? ? ???? ???????????? ? ?????????? ? ???????????? ??? ? ? ? ??? v cc ???????? ? ?????? ? ???????? t a = 25 c ????? ? ??? ? ????? t a = 40 to 85 c ????? ? ??? ? ????? t a = 55 to 125 c ??? ? ? ? ??? ???? ???? symbol ???????????? ???????????? parameter ??? ??? v cc v ????? ????? typ ???? ???? limit ????? ????? limit ????? ????? limit ??? ??? unit ???? ???? t su ???????????? ???????????? setup time, si to sck ??? ??? 3.3 5.0 ????? ????? ???? ???? 3.5 3.0 ????? ????? 3.5 3.0 ????? ????? 3.5 3.0 ??? ??? ns ???? ? ?? ? ???? t su(h) ???????????? ? ?????????? ? ???????????? setup time, sck to rck ??? ? ? ? ??? 3.3 5.0 ????? ? ??? ? ????? ???? ? ?? ? ???? 8.0 5.0 ????? ? ??? ? ????? 8.5 5.0 ????? ? ??? ? ????? 8.5 5.0 ??? ? ? ? ??? ns ???? ???? t su(l) ???????????? ???????????? setup time, sclr to rck ??? ??? 3.3 5.0 ????? ????? ???? ???? 8.0 5.0 ????? ????? 9.0 5.0 ????? ????? 9.0 5.0 ??? ??? ns ???? ? ?? ? ???? t h ???????????? ? ?????????? ? ???????????? hold time, si to sck ??? ? ? ? ??? 3.3 5.0 ????? ? ??? ? ????? ???? ? ?? ? ???? 1.5 2.0 ????? ? ??? ? ????? 1.5 2.0 ????? ? ??? ? ????? 1.5 2.0 ??? ? ? ? ??? ns ???? ? ?? ? ???? t h(l) ???????????? ? ?????????? ? ???????????? hold time, sclr to rck ??? ? ? ? ??? 3.3 5.0 ????? ? ??? ? ????? ???? ? ?? ? ???? 0 0 ????? ? ??? ? ????? 0 0 ????? ? ??? ? ????? 1.0 1.0 ??? ? ? ? ??? ns ???? ???? t rec ???????????? ???????????? recovery time, sclr to sck ??? ??? 3.3 5.0 ????? ????? ???? ???? 3.0 2.5 ????? ????? 3.0 2.5 ????? ????? 3.0 2.5 ??? ??? ns ???? ? ?? ? ???? t w ???????????? ? ?????????? ? ???????????? pulse width, sck or rck ??? ? ? ? ??? 3.3 5.0 ????? ? ??? ? ????? ???? ? ?? ? ???? 5.0 5.0 ????? ? ??? ? ????? 5.0 5.0 ????? ? ??? ? ????? 5.0 5.0 ??? ? ? ? ??? ns ???? ? ?? ? ???? t w(l) ???????????? ? ?????????? ? ???????????? pulse width, sclr ??? ? ? ? ??? 3.3 5.0 ????? ? ??? ? ????? ???? ? ?? ? ???? 5.0 5.0 ????? ? ??? ? ????? 5.0 5.0 ????? ? ??? ? ????? 5.0 5.0 ??? ? ? ? ??? ns
mc74vhct595a http://onsemi.com 8 sck sqh 3 v gnd 1.5 v 1.5 v t plh t phl t w 1/f max sclr sqh sck t w 1.5 v 1.5 v 1.5 v 3 v gnd 3 v gnd t phl t rec figure 2. figure 3. switching waveforms rck qaqh 1.5 v t plh t phl 3 v gnd figure 4. figure 5. qaqh qaqh 1.5 v 1.5 v t pzl t plz t pzh t phz 3 v gnd high impedance v ol +0.3v v oh 0.3v high impedance oe 1.5 v si 1.5 v 1.5 v sck or rck 3 v gnd valid t su t h figure 6. t su(h) 1.5 v 1.5 v 3 v gnd 3 v gnd sck rck 3 v gnd t w figure 7. test circuits *includes all probe and jig capacitance c l * test point device under test output *includes all probe and jig capacitance c l * test point device under test output connect to v cc when testing t plz and t pzl . connect to gnd when testing t phz and t pzh . 1 k w figure 8. figure 9. 1.5 v sclr 1.5 v 3 v gnd gnd 3 v gnd 3 v v ol v oh
mc74vhct595a http://onsemi.com 9 timing diagram sck si sclr rck oe qa qb qc qd qe qf qg qh sqh note: output is in a highimpedance state. input equivalent circuit input output equivalent circuit output parasitic diode
mc74vhct595a http://onsemi.com 10 package dimensions 0.25 (0.010) t b a m s s min min max max millimeters inches dim a b c d f g j k m p r 9.80 3.80 1.35 0.35 0.40 0.19 0.10 0 5.80 0.25 10.00 4.00 1.75 0.49 1.25 0.25 0.25 7 6.20 0.50 0.386 0.150 0.054 0.014 0.016 0.008 0.004 0 0.229 0.010 0.393 0.157 0.068 0.019 0.049 0.009 0.009 7 0.244 0.019 1.27 bsc 0.050 bsc notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: millimeter. 3. dimensions a and b do not include mold protrusion. 4. maximum mold protrusion 0.15 (0.006) per side. 5. dimension d does not include dambar protrusion. allowable dambar protrusion shall be 0.127 (0.005) total in excess of the d dimension at maximum material condition. 1 8 9 16 a b d 16 pl k c g t seating plane r x 45 m j f p 8 pl 0.25 (0.010) b m m soic16 d suffix case 751b05 issue j ??? ??? dim min max min max inches millimeters a 4.90 5.10 0.193 0.200 b 4.30 4.50 0.169 0.177 c 1.20 0.047 d 0.05 0.15 0.002 0.006 f 0.50 0.75 0.020 0.030 g 0.65 bsc 0.026 bsc h 0.18 0.28 0.007 0.011 j 0.09 0.20 0.004 0.008 j1 0.09 0.16 0.004 0.006 k 0.19 0.30 0.007 0.012 k1 0.19 0.25 0.007 0.010 l 6.40 bsc 0.252 bsc m 0 8 0 8 notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: millimeter. 3. dimension a does not include mold flash. protrusions or gate burrs. mold flash or gate burrs shall not exceed 0.15 (0.006) per side. 4. dimension b does not include interlead flash or protrusion. interlead flash or protrusion shall not exceed 0.25 (0.010) per side. 5. dimension k does not include dambar protrusion. allowable dambar protrusion shall be 0.08 (0.003) total in excess of the k dimension at maximum material condition. 6. terminal numbers are shown for reference only. 7. dimension a and b are to be determined at datum plane w. section nn seating plane ident. pin 1 1 8 16 9 detail e j j1 b c d a k k1 h g detail e f m l 2x l/2 u s u 0.15 (0.006) t s u 0.15 (0.006) t s u m 0.10 (0.004) v s t 0.10 (0.004) t v w 0.25 (0.010) 16x ref k n n tssop16 dt suffix case 948f01 issue o
mc74vhct595a http://onsemi.com 11 package dimensions h e a 1 dim min max min max inches 2.05 0.081 millimeters 0.05 0.20 0.002 0.008 0.35 0.50 0.014 0.020 0.18 0.27 0.007 0.011 9.90 10.50 0.390 0.413 5.10 5.45 0.201 0.215 1.27 bsc 0.050 bsc 7.40 8.20 0.291 0.323 0.50 0.85 0.020 0.033 1.10 1.50 0.043 0.059 0 0.70 0.90 0.028 0.035 0.78 0.031 a 1 h e q 1 l e 10 0 10 l e q 1 notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: millimeter. 3. dimensions d and e do not include mold flash or protrusions and are measured at the parting line. mold flash or protrusions shall not exceed 0.15 (0.006) per side. 4. terminal numbers are shown for reference only. 5. the lead width dimension (b) does not include dambar protrusion. allowable dambar protrusion shall be 0.08 (0.003) total in excess of the lead width dimension at maximum material condition. dambar cannot be located on the lower radius or the foot. minimum space between protrusions and adjacent lead to be 0.46 ( 0.018). m l detail p view p c a b e m 0.13 (0.005) 0.10 (0.004) 1 16 9 8 d z e a b c d e e l m z soic eiaj16 m suffix case 96601 issue o
mc74vhct595a http://onsemi.com 12 on semiconductor and are trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. atypicalo parameters which may be provided in scill c data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including atypicalso must be validated for each customer application by customer's technical experts. scillc does not convey any license under its patent r ights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into t he body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. publication ordering information central/south america: spanish phone : 3033087143 (monfri 8:00am to 5:00pm mst) email : onlitspanish@hibbertco.com asia/pacific : ldc for on semiconductor asia support phone : 3036752121 (tuefri 9:00am to 1:00pm, hong kong time) toll free from hong kong & singapore: 00180044223781 email : onlitasia@hibbertco.com japan : on semiconductor, japan customer focus center 4321 nishigotanda, shinagawaku, tokyo, japan 1410031 phone : 81357402745 email : r14525@onsemi.com on semiconductor website : http://onsemi.com for additional information, please contact your local sales representative. mc74vhct595a/d north america literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 3036752175 or 8003443860 toll free usa/canada fax : 3036752176 or 8003443867 toll free usa/canada email : onlit@hibbertco.com fax response line: 3036752167 or 8003443810 toll free usa/canada n. american technical support : 8002829855 toll free usa/canada europe: ldc for on semiconductor european support german phone : (+1) 3033087140 (mf 1:00pm to 5:00pm munich time) email : onlitgerman@hibbertco.com french phone : (+1) 3033087141 (mf 1:00pm to 5:00pm toulouse time) email : onlitfrench@hibbertco.com english phone : (+1) 3033087142 (mf 12:00pm to 5:00pm uk time) email : onlit@hibbertco.com european tollfree access*: 0080044223781 *available from germany, france, italy, england, ireland

▲Up To Search▲

Price & Availability of HCT595ADT

	To Download HCT595ADT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .